Acoustic Research AWD211 - Manual (Page 4)

G
ETTING
S
TARTED
4
Installing the Headphone Batteries
1. Find the depression in the middle of
the left headphone. Press down on
this area to remove the headphones’
battery compartment cover.
2. Insert the two (2) rechargeable
AA batteries (included) in the left
headphone, following the polarity
(+ and –) diagram inside the
compartment.
3. Place the battery cover back on the left headphone. Make sure it
locks back into place.
Important: DO NOT mix batteries with different chemistry types
(for example, a zinc battery with an alkaline battery). DO NOT
mix new and used batteries. DO NOT leave batteries installed in
the product when not in use for long periods. Always remove old,
weak or worn-out batteries promptly and recycle or dispose of
them in accordance with local and national regulations.
Important: If you are using rechargeable batteries NiMH or NiCd
(such as the batteries provided), the batteries will charge when
the headphones are put on the charging cradle of the transmitter.
DO NOT put the headphones on the charging cradle of the
transmitter if you installed alkaline or other non-rechargeable
batteries – this could cause the batteries to leak, which would
damage the headphones.
Left headphone, side view
Depression