Maintenance – Sper Scientific 860031 pH - mV Bench-Top Meter User Manual
Page 52
Advertising
52
MAINTENANCE
To expose the new unused fiber portion:
1. Use tweezers to pull out the fiber junction and expose
the new unused portion.
2. Cut the clogged fiber and expose the new portion.
Conductivity Probe
Before using, soak the conductivity probe in distilled water
for 30 minutes. We recommend leaving the cover on the
probe but you may remove it before calibration and
measurement. If removing the cover, the probe must be
uncapped in Calibration and Measurement Modes.
Advertising
This manual is related to the following products: