SUPERTOOTH BUDDY - Manual (Page 7)

7
EN
Volume Setting:
Increase or decrease the volume by pressing the Volume Up (2) or
Volume Down (3) button. Press repeatedly until the desired level
is reached. A beep will be heard as lowest and highest levels are
reached.
To transfer Audio from the Handsfree kit to the Phone:
Simply turn off the handsfree kit by pressing the On/Off (8) button for 3
seconds and the audio will automatically be transferred to the phone.
To Transfer Audio from the Phone to the Handsfree kit:
Press the MFB (6) for 1 second and the audio will automatically be
transferred to the handsfree kit.
Note: For some phones, you may need to accept a connection prompt
on the phone before automatic transfer takes place.
To end the current call and accept the second incoming call
Short press the MFB (6) button will end the current call and accept
the second call. The audio for the second call will automatically be
heard through the handsfree kit.
Note: Call waiting is not available if two phones are connected
(MultiPoint).
b. Multi-Point Function
The SUPERTOOTH BUDDY can simultaneously connect to 2
Bluetooth devices. The SUPERTOOTH BUDDY is active on both
mobile phones. User actions (voice dial, redial) will control the primary
phone, but an incoming call on any of the two phones can be accepted
or rejected from the SUPERTOOTH BUDDY.
Multi-Point Activation:
From pairing mode or standby mode, press and hold the Volume
Up (2). A beep will be heard on kit.
Multi-Point Deactivation:
From pairing mode or standby mode, press and hold the Volume
Down (3). A beep will be heard on kit.
H. Advanced Functions
a. Call waiting
Important: Before using this feature, make sure that your phone and
the phone network both support call waiting.
If there’s a second incoming call, a beep will be heard from the
SUPERTOOTH BUDDY.