Tivax LSS-505 - Manual (Page 2)

1. As shown in the picture A, normal stitching shall have top and
bottom threading neither over tight or loose.
ADJUSTING STITCHING
Top thread
Cloth
Bottom thread
9
FEATURES
Fig.A
Fig.B
Fig.C
2. If the bottom threading looks like a straight line, which indicates
the top thread is too loose. Please turn in thread damp clock wise to
increase pressure until the stitching returns to normal.
3. However, when the top thread looks like a straight line indicating
an over-tight top thread, slowly turn the thread clamp anti clock wise
to reduce pressure until the stitching back to normal.
Correct Disposal of this product
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsible to promote
the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for
environmental safe recycling.