Turbo Action 23951 Turbo Hydro 350 Tranz Brake (PRN123) - Manual

Part #23951 1 10/93,7/97,9/98
CHEETAH PRO BRAKE DRAG ONLY VALVE BODY (PRN123)
(No Gear Braking in 1st or 2nd )
POSITIVELY NOT FOR STREET USE
Turbo Hydro “350” & “375B”
1969-80 (Non-Lockup)
Part #23951
SPECIAL NOTE:
This valve body can be installed without removing transmission, however for quickest reaction
times and maximum longevity of transmission the internal changes should be performed at
your earliest convenience.
FIRST, READ INSTRUCTIONS CAREFULLY, THEN PROCEED TO INSTALL VALVE BODY
BY FOLLOWING EACH STEP INDIVIDUALLY.
INCLUDES: 1 - Valve Body
1 - 17258
5/16” ball Bearing
1 - 23040 Special Plug
1 - 23096P 2-3 Performance Plate
1 - 23099C Pan Gasket
1 - 23100M Spacer to Valve Body Gasket
1 - 23101M Spacer to Case Gasket
1 - 23500-1 Special Valve Body Spacer Plate
1 - 23520 Spring Modulator Valve
1 - 24158 Modulator O-ring
1 - 24280A Tranz Brake Solenoid (Two Wire)
2 - 00781A Terminals
2 - 00782A Terminals
1 - 23131 2 1/4” Freeze Plug
Installation Instructions
STEP #1: Transmission should be cool before installing. Also, place gear shift selector in
neutral. If vehicle is on the ground, secure so it will not roll.
1535 Owens Road, Jacksonville, FL 32218 (904)741-4850
FAX (904)741-4853