Tuff Country 30927 - Dodge 94-12 Ram 4wd Adjustable Sway Bar End Links - Manual (Page 4)

8. Locate (1) 1/2” x 2 1/2” bolt, (2) 7/16” flat washers, (1) 1/2”
unitorque nut and (2) S10194 conned sleeves from hard-
ware bag 30927NB1. Install the new all thread sleeve and
hiem joints to the upper bracket using the new hardware and
conned washer. Make sure to follow the photo’s to properly
install the conned sleeves. Make sure to use loctite and
torque to 70 ft lbs.
9. Using a 9/16” drill bit, carefully drill out the lower sway bar
end link hole.
10. Locate (1) S10196 lower double sided threaded bracket,
(1) 1/2” USS flat washers and (1) 9/16” unitorque nut from
hardware bag 30927NB2. Install the new lower double side
threaded bracket into the stock lower mount and secure
using the new hardware. Make sure to use loctite and torque
to 85 ft lbs. Special note: Use a 7/8”open ended wrench
to hold the new lower bracket when torquing the 9/16”
unitorque nut.
.