Tuff Country 35920 - Dodge 94-02 Ram 2500 / 3500 4.5 kit User Manual

Tuff Country For the car

Advertising
background image

Old part # D52B
New part # 35920
Dodge Ram 2500 / 3500 4.5” Suspension system
Parts list:

Part

#

Description

Qty.

D5I-001

4.5” Upper coil spring spacer

2

D5I-002

Upper

control

arm

2

D3I-003

Lower

control

arm

2

D5I-004

Front driver side track bar bracket

1

DODDSSWAY-01 Driver side sway bar drop bracket

1

DODPSSWAY-01 Passenger side sway bar drop bracket 1
D5I-010

Track bar kicker support bracket

1

TCI-R23D Rear

add-a-leaf

2

BL5503

Rear

block 2

5U-2514S

9/16” x 3” x 14 5/8” square u-bolt

4

916NW

Hardware

bag

1

35920NB

Hardware

bag

1

CB12

Hardware

bag

1

35920NB1 Hardware

bag

1

D3IPL

Poly

bushing

bag

1

D3ISL

Sleeve

bag

1

D5ISL

Sleeve

bag

1

35920INST

Instruction sheet (customer copy)

1

35920INST

instruction sheet (installer copy)

1

MIRRORHANGER Rear view mirror hanger

1

WARNINGDECAL

Warning

decal

1

DECAL

Window

sticker

1

Installation manual

4.5” Suspension system

1994 — 2002 Dodge Ram 2500 / 3500

Old part # D52B

New part # 35920

Sj052206rev.03

Congratulations on your selection to purchase a Tuff
Country EZ-Ride Suspension System. We at Tuff
Country EZ-Ride Suspension are proud to offer a
high quality product at the industries most
competitive pricing. Thank you for your confidence
in us and our product.

For a list of all parts, please refer to the Parts
Description Page, at the end of the Installation
Manual.

Make sure to use thread locker or locktite on all new
and stock hardware associated with the installation
of this suspension system.

It is the responsibility of the installers to make sure
that the rear view mirror hanger is hung from the rear
view mirror. The rear view mirror hanger has
instructions on proper post installation procedure.

The Tuff Country EZ-Ride Suspension product safety
label that is included in your kit box must be
installed inside the cab in plain view of all occupants.

Important customer information

Tuff Country EZ-Ride Suspension highly
recommends that a qualified or a certified mechanic
performs this installation.

If you desire to return your vehicle to stock, it is the
customers responsibility to save all stock hardware.

It is the responsibility of the customer or the
mechanic to wear safety glasses at all times when
performing this installation.

It is the customers/installers responsibility to read
and understand all steps before installation begins.
OEM manual should be used as a reference guide.

This vehicles reaction and handling characteristics
may differ from standard cars and/or trucks.
Modifications to improve and/or enhance off road
performance may raise the intended center of
gravity. Extreme caution must be utilized when
encountering driving conditions which may cause
vehicle imbalance or loss of control. DRIVE SAFELY!
Avoid abrupt maneuvers: such as sudden sharp
turns which could cause a roll over, resulting in
serious injury or death.

It is the customers responsibility to make sure that a
re-torque is performed on all hardware associated
with this suspension system after the first 100 miles
of installation. It is also the customers responsibility
to do a complete re-torque after every 3000 miles or
after every off road use.

After the original installation, Tuff Country EZ-Ride
Suspension also recommends having the alignment
checked every 6 months to ensure proper tracking,
proper wear on tires and front end components. Tuff
Country EZ-Ride Suspension takes no responsibility
for abuse, improper installation or improper
suspension maintenance.

Advertising