Avocent DSR1161 - Manual (Page 29)

22 DSR Installer/User Guide Chapter 3: Local Port Operation 23
5. To position the status flag on the desktop:
a. Click Set Position to gain access to the Position Flag screen.
Figure 3.5: Position Flag
b. Left click on the title bar and drag to the desired location.
c. Right click to return to the Flag dialog box.
NOTE: Changes made to the flag position are not saved until you click OK in the Flag dialog box.
6. Click OK to save settings or click X to exit without saving changes.
Setting console security
Use the Security dialog box to set security on your local port console. You can
establish a screen saver mode that engages after your console remains unused
for a user-definable time delay. Once engaged, your console will remain
locked until you press any key or move the mouse. You will then need to type
in your password to log in.
Use the Security dialog box to lock your console with password protection, set
or change your password and enable the screen saver.
To access the Security dialog box
1. Press Print Screen. The Main dialog box will appear.
2. Click Setup-Security. The Security dialog box appears.
Figure 3.6: Security Dialog Box
To set or change the password:
1. Single-click and press Enter or double-click in the New text box.
2. Type the new password in the New text box and press Enter. Passwords
may be up to 12 characters long and are case sensitive. Legal characters
are: A-Z, a-z, Ø-9, space and hyphen.