Tuff Country 52070 - Toyota Tundra 07-13 2 leveling kit - Manual (Page 8)

33. Locate the skid plate and the skid plate hardware. Install the skid plate into the OE location and secure using the hard-
ware. Make sure to use loctite and torque all skid plate mounting hardware to 18 ft lbs.
34. Re-install the tires and wheels and carefully lower the vehicle to the ground.
35. Check and double check to make sure that all steps were performed properly. Once installation is complete take vehi-
cle directly to an alignment center for proper front end alignment.
Congratulations, installation complete!
Special note: After the completion of the installation, Tuff Country EZ-Ride Suspension recommends taking the
vehicle to an alignment shop and having a proper front end alignment performed.
Tuff Country EZ-Ride Suspension recommends that a complete re-torque is done on all bolts associated with this
suspension system. It is the customers responsibility to make sure that a re-torque is performed on all hardware
associated with this suspension system after the first 100 miles of installation. It is also the customers responsi-
bility to do a complete re-torque after every 3000 miles or after every off road use. Neglect of following these steps
could cause brackets to come loose and cause serious damage to the suspension system and to the vehicle.
Tuff Country EZ-Ride Suspension packages (2) sets of instruction sheets with this box kit. (1) is for the installer
and (1) is for the customer. The (1) for the customer has some post installation procedure literature and it is the
installers responsibility to make sure that the customer receives a copy of the installation manual along with the
literature.
If you have any questions or concerns, please feel free to contact Tuff Country or your local Tuff Country dealer.