Anthem MRX 710 - Manual (Page 21)

12
For optimum performance and enjoyment, your receiver should be properly set up.
This may appear like a lot of work but most settings do not need to be changed
from defaults. The important ones relate to your display and input connections,
and distance from listening area to each speaker. Anthem Room Correction will set
crossovers and channel levels. The rest is preference and the listening mode presets,
for example, should be set after you have played various sources and determined
which surround modes you like most.
HOW TO NAVIGATE IN THE SETUP MENU
• Press Setup to enter or exit
• Use the up/down/left/right buttons to move through menus and selections
• Press PG/PR up/down to skip page
• Press Select to make a selection or to start/finish editing the item
• Pressing Last while editing returns the item to its previous setting
• Press Clear to set the item to its default value
The menu below appears on your display once pressing Setup. If it does not appear,
make compatible selections in the HDMI Output Configuration menu while using the
front panel display which shows similar information, one item at a time. On-screen,
up to nine menu items are displayed at once although for clarity this manual shows
all items in each menu together.
S E T U P
Main Menu
HDMI Output Configuration
Speaker Setup
Bass Management
Listener Position
Level Calibration
Input Setup
Volumes / REC Output
Network / Remote Control
Display
General Configuration
Save / Load Settings
System Information
SELECT
INPUT
SETUP
CLE
AR
LAST
PG/PR
Remote Front Panel