Anthem MRX 710 - Manual (Page 46)

37
SUBWOOFER HIGH PASS FREQUENCY
Use this with High Pass Order when manually creating a curve on the lower end of
the subwoofer’s response. The left side of the red measured curve is the guideline for
shaping the target curve. An attempt to use this as a bottom-end boost to increase
low-frequency output is likely to be detrimental to the subwoofer’s performance. If the
subwoofer’s specifications indicate that low-frequency output should be greater than the
uncorrected in-room response curve is showing, then the proper solution would be to
reposition the subwoofer.
MINIMUM SUBWOOFER EQ FREQUENCY
If you would not like for ARC to equalize the subwoofer channel below a certain
frequency, enter it here.
4.8 PRINTING A REPORT
To print a copy of your graphs and targets, click on Print.
4.9 UPDATING ARC
Check www.anthemAV.com periodically for ARC software updates. The download
contains revision history, which may also indicate that the processor requires an update for
the ARC version to work correctly. If a newer version is posted and you would like to use
it, check your current version:
• Run Anthem Room Correction.
• Click on About. The version number will be displayed. Proceed only if your version is
not the latest.
• Download the latest ARC-2 software from www.anthemAV.com and save it to
Desktop.
• When the .zip file download is complete, extract it to Desktop. The software will not
work properly if an attempt is made to run it from a compressed folder.
• Open the extracted folder and double click on setup or setup.exe. Software installation
instructions will appear on your screen.If you are installing ARC on the computer for
the first time, copy your serialized file(s) from your ARC CD to the extracted folder on
Desktop before double-clicking on setup. This way they will be added to Program Files
as the software is installed.
• When installation is complete, you can delete the downloaded file and the extracted
folder.