Anthem AVM 50v 3D - Manual (Page 13)

5
1.6 REMOTE CONTROL
1 – Learn – for customization of remote
2 – Power On and Power Off
3 – Control mode. These are not source selection keys (see #17).
4 – • Copy MAIN when ZONE2, ZONE3, or RECORD is selected.
• LIST for PVRs.
5 – Previous / next source seek
6 – Bass / treble selection for adjustment
7 – RECORD path selection (must be in MAIN control mode)
8 – Balance
9 – Navigation:
• Setup menu (press and hold Menu for 3 seconds)
• Back (for setup)
• Status (press Select)
• FM • AM direct entry (press and hold Select for 3 seconds)
• FM • AM tuning
• Adjustment for surround mode, dynamics, THX,
levels, bass, treble, timers, brightness, and lip-sync
• FM • AM seek
• Adjustment for balance and lip-sync
10 – THX selection
11 – FM • AM preset up/down
12 – Sleep timer selection / timers setting
13 – Volume up/down and mute
14 – Channel selection for level, bass, treble, and balance
15 – Numeric pad and shortcuts:
• 1-6: FM • AM preset
• 7: Video processing menu (press and hold for 3 seconds)
• 8: Front panel brightness setting
• 8: Lip-sync selection (press and hold for 3 seconds)
• 9: Tone Bypass
• 0: Dynamics selection
• 0: Video input adjustments (press and hold for 3 seconds)
16 – • Surround mode selection
• Video selections (press and hold for 3 seconds)
17 – Next source
18 – Source selection
Front:
Infrared transmitter and receiver.
Bottom:
Battery cover. When battery voltage is low the control mode key will blink
5 times after a key is pressed.
1. INTRODUCTION
continued …
34
3 4
4
2
8
10
12
16
17
13
9
5
6
7
1
3
11
18
15
14