Anthem MRX 700 - Manual (Page 31)

23
3. SETUP
continued …
3.8 DISPLAYS / TIMEOUT
This menu allows you to configure on-screen display, front panel display, and selection time.
Display Brightness:
Lets you select between bright, dim, or no front panel display.
Front Panel Wake Up:
If Display Brightness is set to Dim or Off, it can be made to change to a brighter level while you make any
adjustment – choose None, Up 1 brightness level, or Bright. When None is chosen and the display is off, it
will behave as if set to Up 1 to prevent confusion as to whether the power is on or off.
Display Timeout:
This is the time that elapses after an adjustment is made in any path. After that, on-screen text disappears,
the front panel becomes dim, and the regular MAIN display returns. Adjustable from 1 to 15 seconds.
Video Mute:
For when there’s no video input, select the “no signal” output – black, magenta, or blue screen.
Status Message:
To disable on-screen info shown when changing volume, source, etc, turn this setting Off.
Status Message Timeout:
Set the amount of time that the status message remains on-screen.
Setup Menu Timeout:
Set the amount of time that the setup menu remains on-screen, up to 15 minutes. It should not be left on long
enough to damage the display, if it is a type that is prone to image retention (burn-in).
Displays/Timeout
Display Brightness Dim
Front Panel Wake Up Up 1
Display Timeout 5 s
Video Mute Black
Status Message On
Status Message Timeout 3 s
Setup Menu Timeout 5 min