Anthem MRX 700 - Manual (Page 32)

24
3. SETUP
continued …
3.9 TRIGGER CONFIGURATION
When the receiver’s trigger output is connected to the trigger input of another component, such as an
amplifier or projector, the receiver can turn it on or off according to the trigger’s setup. For components that
do not have trigger inputs, a triggerable power bar may work (see your dealer).
In the example shown, the trigger activates while Main or Zone 2 power is turned on. Trigger outputs can
also be set to activate according to source instead of Power.
After highlighting Power or a source, press SELECT and use the 34 buttons to select Main or Z2. To set the
condition, use the 56 buttons to change the “NA” to a “-”.
Trigger action can be set to be delayed up to 15 seconds, in 1-second steps.
Changes to the trigger setup do not take effect until exiting from the setup menu, to avoid unnecessary rapid
turning off and on of triggers while making changes.
Trigger Configuration
Main Z2
Power * *
BDP NA NA
CD NA NA
TV NA NA
SAT NA NA
GAME NA NA
AUX NA NA
MEDIA NA NA
TUNER NA NA
iPod NA NA
Trigger Delay 2 s 0-15s (1s step)