Actron KAL9620A User Manual
Page 19
9620 Professional OBD II Scan Tool
19
Scan tool displays VIN, Calibration ID, and CVNs
if supported by vehicle. In example screens, MOD
$10 returned data. Use UP/DOWN arrow keys to
scroll . CVNs are shown as a hexadecimal
number.
Press BACK or ENTER to return to OBDII Function List.
2.3.12 Modules Present
OBD II information may be provided by a single
module or many separate modules. The scan
tool identifies module IDs and communication
type for OBD II modules in vehicle.
Select Modules Present from OBDII Function
List and press ENTER.
When selecting this function, scan tool checks for an established communication link. If
no link is made, a message displays stating so. If link was successful, module(s) and
communication type(s) display on screen.
2.3.13 Review Data
Review Data function allows review of information stored in scan tools memory. The
scan tool does not require power from vehicle to perform this function. Internal battery
power can be used.
Select Review Data from OBDII Function List and press ENTER. Only one function,
Playback, needs detailed instructions.
Playback
Playback function is used to play back a recording. This function is very similar to View
Data. The only difference is View Data is real time viewing of PIDs, while Playback is a
viewing of previously recorded PIDs.
To play back recorded PIDs, select Playback and press ENTER key.
OBDII Function List
|
10)Record Data
]
11) Vehicle Info
[
`12)Modules Present
OBDII Function List
|
`13)Review Data
]
14)PrintData
15)Code Lookup
Review Data
5)O2 Monitor
]
6)Non-Continuous
[
`7)Playback
No Link Established
Controller List
NotAvailable
ID
Protocols
$10 ISO*
$18 ISO*
[
$1A ISO*
No Recording Is
Present. Please
Make Recording
First.
MIL STATUS
ON
CALC LOAD(%)
5.3
ENGINE(RPM)($10)
180[
FRAME: 1
TM: 4.4
VIN # 1 MOD $10
1F1FS11P0S2100001
[