AmpliVox SW124 - Manual (Page 4)

4
1. Power Switch.
2. Power Indicator Light. Turns red when
power is turned on.
3. Microphone Volume Control. This knob
controls output loudness to all 3 micro-
phone inputs and Siren.
4. Dynamic Mic Jack. Dynamic is one kind
of microphone. AmpliVox’s wired, hand-
held microphone is this type.
5. Auxiliary Volume Control. This volume
knob controls the auxiliary volume sepa-
rately from the microphone volume.
6. Tone Control. This knob controls the
tone of the auxiliary input. Turn counter-
clockwise for more bass or clockwise for
more treble. (The microphone jacks don’t
need a tone control because they have
been pre-optimized for the human voice).
7. Left & Right Speaker Jacks. Plug
speaker leads from speakers into the two
jacks.
8. Line Out Jack. Can be used with a
tape recorder The Line Out Jack out-
puts all the sound from the 3 micro-
phone inputs and the auxiliary input.
9. Auxiliary Line In Jack. To play mu-
sic, just plug in your CD player, MP3
player or Amplivox’s Bluetooth Receiv-
er.
10. Wireless Microphone Jack. Op-
tional second wireless receiver goes
here. Then plug AmpliVox’s lapel or
headset microphone into the transmitter;
that’s the one with the belt clip. Now you
are hands-free anywhere within a 300-
foot radius of the receiver.
11. Condenser Microphone Jack—
with phantom power. If you don’t know
what phantom power is, then you don’t
need to know, but a condenser micro-
phone won’t work without it. If you have
AmpliVox’s lapel or headset mic, plug it
in here.
12. Aux Out. For optional 12-15 volt
accessory.
13. DC In Jack. Used for AC Adapt-
er / Charger, plug
it in here. Plug
the other end into
a wall / floor out-
let. Recharge the
built-in SLA
(Sealed Lead
Acid) battery. When charged the
battery gives you a run time of 30
hours.
14. Wireless ON/OFF Switch.
Switches power on to the built-in 16
channel wireless receiver.
15. Wireless 16 Channel Selector.
Channel that you select here must
match with the channel that is select-
ed on the bodypack microphone
transmitter.
16. Wireless 16 Channel UHF
Bodypack Microphone Transmit-
ter. Connect Lapel or Headset
microphone here.
1. Power Switch
2. Power Indicator Light
3. Mic Volume-
controls all 3 mic
inputs
4. Dynamic Mic
Jack— 1/4 ″ for wired,
hand-held mic.
5. Auxiliary Volume—
controls the auxiliary
input separately from the
mic volume
6. Tone Control—
for auxiliary input; counter-
clockwise for more bass; clock-
wise for more treble
7. Left & Right
Speaker Jacks— 1/4 ″
8. Line Out—3.5mm
record your presentation
with a tape recorder or a
computer sound card
9. Auxiliary Line In—
3.5mm add music with a
tape player, CD or MP3
player
10. Wireless Mic
Jack -3.5mm for
optional wireless
receiver
11. Condenser
Mic Jack - 3.5mm
for lapel or headset
mic
12. Aux Out - for
optional 12-15 volt
accessory.
13. DC In Jack
plug in optional
Universal
AC Adapter/ Re-
charger for power.
14. Wireless ON/OFF Switch
Model SW124 Only
CONTROL PANEL
15. Wireless
16 Channel
Selector