Monoprice 7535 MS-03 - Manual (Page 4)

6 5
4 Mounting plate
Attach mounting plate to the top of pillar with the appropriate combination of screw(M-B). Make sure mounting
plate is level. Then tighten the screw ,but do not over tighten. as shown in fig. 4.1 and fig.4.2.
5 Mounting speaker
Remove the backing paper so the adhesive is exposed. Then place the adhesive pad on the mounting plate.
Peel the other side of the backing paper on the mounting Self adhesive pad . Then place the speaker on the
center of the mounting plate. as shown in fig.5.1 and fig.5.2.
M-B
C
M-B
D
fig.4.1
fig.4.2
fig.5.1
fig.5.2
Maintenance
Once you have mounted the stand and the speaker, check that they are sufficiently secure and safe to use.
You should check whether screws are fixed well each two months. If you have any doubts regarding the
installation, please consult our retailer or service department for detail.
M-F
M-F