Pgrade, Upgrade – Monoprice 9204 IP Camera User Manual
Page 36
MPEG-4 wired/wireless IP Camera
3.14. Upgrade
If there is some new firmware available from the supplier of this IP Camera, you
can upgrade the firmware on this page. Please ask for the correct information about
FTP server, username/password account and firmware filename from your supplier,
and then do this upgrade. A status message about the percentage done in the
upgrade procedure is displayed. Please be noticed that during the upgrade procedure,
do not power off the IP Camera, otherwise, the IP Camera could probably enter into
the safe mode(section 3.14). After the upgrade procedure is finished, the system will
restart automatically.
You can upgrade from the ftp server or from the local file in your computer.
During this upgrade procedure, do not try to modify other settings or view the
video.
Figure 3-19: Firmware upgrade settings page
36