Monoprice 9306 H.264 DVR - Manual (Page 13)

4/8/16Channel DVR Quick Manual
12
STATIC: allocating an IP address manually.
DHCP: acquiring an IP address automatically (left picture below).
After selecting the DHCP mode, restart the system after confirmation. After starting, the
system will establish a connection with the DHCP server automatically. When this is
successful, this unit will be allocated with an IP address, which will be displayed on the
screen.
PPPOE: broadband dial-up network access, as shown on the right picture below:
3G:3G function(support CDMA 2000 and WCDMA),select WCDMA.After success to apply,
exit from 3G,and then you can see IP info .
PPPOE name and password: Fill in the PPPOE user
name and password provided by the Internet
service provider.
MEDIA PORT: the port number used in the private
protocol communication between the DVR and PC,
usually being 9000 by default. If this port of the PC
is occupied by any other service, please modify it to
another unused port.
WEB PORT: the http port, usually being 80 by default. If the administrator modifies the
WEB port to any other port, such as 88, you have to postfix the IP with the port number,
and enter “http://192.168.1.19:88” in the address bar when accessing the DVR via the IE.
IP ADDRESS: allocating an IP address according to the network environment of the DVR
SUBNET MASK: filling in a subnet mask according to the network environment of the DVR
GATEWAY: Setting the gateway according to the network environment of the DVR. If there
is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to set the corresponding gateway.
DNS: setting the IP address of the domain name server (DNS varies from city to city); you
can refer to the domain name server configurations of the PC.
UPNP: When the UPNP function is on (UPNP function on the router end is also on), then
the DVR will map the port and IP into the router automatically.
DDNS SETUP
Click “DDNS Setup” to enter the screen (picture below):