Monoprice PID 8743 Wireless N ADSL2 Modem and Router 802 11N WPS Function 2T2R 300Mbps - Manual (Page 105)

ADSL2/2+ Router
- 105 -
input it in its text box, then save this configuration. Meanwhile,
use the same PIN code in the client for connection.

Enable WPS: check/uncheck to enable/disable the WPS
function. It is enabled by default.
Note: The WPS feature only functions with wireless
network available.

Network Authentication: To secure your wireless network,
system provides several authentication modes:

Open: you can select “no encryption” or WEP（64 bits/128
bits）as encryption algorithm.

Shared: you can select WEP 64 bits/ WEP 128 bits as encryption
algorithm.

WPA-PSK: you can select AES, TKIP or TKIP+AES as encryption
algorithm.

WPA2-PSK: you can select AES, TKIP or TKIP+AES as
encryption algorithm.

Mixed WPA/ WPA2-PSK: you can select AES, TKIP or
TKIP+AES as encryption algorithm.
4.3.3 MAC Filter
MAC address filter can allow or refuse specific clients to access your
wireless network, see the screen below: