American Audio DIGI-PRO User Manual
Page 15
is in direct reference to the
TIME METER (57,
58, & 59)
. When the
TOTAL REMAIN
indicator is
displayed in the
LCD (14)
, the time defined will
refer to a disc's total remaining time. The time
mode is changed by tapping on
TIME BUTTON
(5).
67. SINGLE INDICATOR - This indicates the unit
is in single play mode, the unit will play a single
and return to CUE mode. If the single indicator
is not displayed the unit is in continuous mode.
In continuous mode the drive will play through all
the tracks on the disc. Once all the tracks have
ended the unit will return to cue mode.
68. 1 INDICATOR - This indicator is in direct
reference to the
REPEAT (69)
indicator and
repeat program play function (see programming
on page 23). When the repeat function is first
activated, the unit enters a repeat track mode.
This mode will repeat a single track over and over
until the repeat function is disengaged. The single
track repeat function is indicated by the
REPEAT
(69)
and 1 icons in the
LCD (14).
69. REPEAT INDICATOR - This indicator is in
direct reference to the repeat program play func-
tion (see programming on page 23). When the
repeat function is activated the "REPEAT" (69)
icon will display in the
LCD (14)
. When the repeat
function is first activated, the unit enters a repeat
track mode. This function is indicated by the
REPEAT (69)
and 1
(68)
icons in the
LCD
(14)
.
58, & 59).
As with the
TIME METER (57, 58, &
59),
this bar is also dependent on the selected
time function
TOTAL REMAIN (66), REMAIN (62)
OR ELAPSE (56).
This bar will begin to flash
when 15 seconds of a track remain and will
begin to rapidly flash when three seconds of a
track remain. The flashing bar is a great visual
reminder a track is about to end. The flashing
bar will function regardless of which time mode
the unit is in.
62. REMAIN INDICATOR - This indicator is in
direct reference to the
TIME METER (57, 58, &
59)
. When the
REMAIN
indicator is displayed in
the
LCD (14)
, the time defined will refer to a
single track's remaining time. The time mode is
changed by tapping on
TIME BUTTON (5).
63. DATA/FX INDICATOR - This icon will display
when the DATA function is engaged. When the
DATA function is engaged the buttons along the
top of the
LCD (14)
will function as they are
detailed. When this icon is off the buttons along
the top of the
LCD (14)
will function as direct track
access buttons.
64. RELOOP INDICATOR - This icon will display
when a LOOP is engaged or is set and ready
to be engaged.
65. LOOP - This icon flashes when a loop is
engaged or displays when a loop is not engaged
but is set and ready to be engaged.
66. TOTAL REMAIN INDICATOR - This indicator
LIQUID CRYSTAL DISPLAY (LCD) CONT.
©
American Audio
®
- www.americandj.com - DIGI-PRO™ Instruction Manual Page 15