Pure Evoke D2 Mio with Bluetooth - Manual (Page 12)

10
Setting the alarm and sleep timer
The alarm in Evoke switches the radio on (if in standby) and tunes to a digital or FM radio station or sounds
a tone.
Note: The alarm function does not work when Evoke is being powered by the ChargePAK B1.
FM
Alarm
the latest news
BBC Radio 2
PM DR
the latest news
BBC Radio 2
PM
DR
Setting the alarm
1. Press Menu.
2. Turn and press the Select dial to choose ‘Alarm’.
3. Turn and press the Select dial to choose ‘On’.
4. Turn and press the Select dial to set the hour for the alarm. Repeat
to set the minutes for the alarm.
5. Turn and press the Select dial to specify one of the following alarm
repeat options: ‘Once’, ‘Daily’, ‘Weekdays’, ‘Weekends’, ‘Every
Saturday’ or every ‘Every Sunday’ and press
Select to confirm.
6. Turn and press the Select dial to specify ‘FM’, ‘DAB’ or ‘Tone’. If
you are specifying a tone alarm, skip to step 9.
7. Turn and press the Select dial to specify which station should be
played when the alarm goes off. You have the option of selecting
one of your preset stations or you can select ‘Last Used’ to select
the station that you were last listening to.
8. Turn and press the Select dial to set the volume that the radio will
play at when the alarm sounds.
9. The alarm
the latest news
BBC Radio 2
PM DR icon will appear on the display to show that the alarm
is set.
DRFM PM
PM DR
Off <On>
Alarm setup
PM DR
07:00
Alarm time
DR
Repeat
Daily
DRFM PM
Alarm source
Tone
DRFM PM
PM DR
stored
Alarm
1
Evoke_D2_Bluetooth_Mio_UKAus.indb 10 6/11/2014 11:31:21 AM