Pure Evoke D2 Mio with Bluetooth - Manual (Page 19)

17
ChargeP
AK B1
ChargeP
AK B1
Installing the ChargePAK B1
5.5V DC
Note: Switch Evoke off and disconnect from the mains power supply before installing ChargePAK B1.
Note: If you are charging ChargePAK for the first time or after an extended period of inactivity it is
recommended that it is charged for around 24 hours to ensure full battery power. If ChargePAK is flat there
may be a slight delay before the battery charging indicator is displayed.
Evoke_D2_Bluetooth_Mio_UKAus.indb 17 6/11/2014 11:31:22 AM