Pure Highway 300Di - User Guide - Manual (Page 16)

14
Removing/fitting the controller
The controller can be fitted and removed easily for security purposes. Your installation may also use a swivel bracket or some sort of universal or model-specific
mounting bracket onto which the controller bracket shown is mounted – if so, take extra care when removing or fitting the controller.
Removing the controller
Fitting the controller
Removing the controller
Hold the bracket and pull the controller firmly up by the sides to remove it.
If Highway 300Di is switched on when you remove the controller it will continue radio or track playback
until you replace and stop playback, turn off Highway or turn off your ignition.
Note: We recommend that you remove the controller from your car (or store out of direct sunlight) on hot/
sunny days if your vehicle is to be left unattended, as temperatures inside a closed vehicle can get
very high.
Fitting the controller
Slide the controller onto the mounting bracket as shown and click into place.