Racing Electronics SC150 - Manual (Page 14)

Programming Channels
Before you can scan, you must program the channels
within a bank. You can store one frequency per channel, up
to 100 channels.
Save the first 10 channels for sporting events. When you
program the appropriate frequencies for an event into these
channels, you can use DIRECT CHANNEL SCAN and
DIRECT CHANNEL ACCESS to quickly monitor the
activities.
Note: If appears on the display (keypad locked),
unlock the keypad by pressing and holding until
disappears.
There are two ways to program a channel:
n Manually select a channel and frequency, using the
numeric keypad. You can determine the frequencies you
want from the Betty Bearcat (or similar) Frequency Book
(optional), or from the Sports Activity Frequency Book
(included).
n Search a band to find an active frequency, and then
directly store it into the next available channel
A. Programming By Manual Entry
1. Select a frequency from the appropriate Frequency
Directory.
Example: Program 125.2500 MHz into Channel 18.
2. Make sure the scanner is in the SCAN Mode. If it is
in the SRCH Mode, press
S
.
3. Make sure the scanner is in the BANK Mode. If it is
in the DIRECT Mode, press B
.
4. Press
H
to stop scanning.
5. Press
1 8 H
to go to Channel 18.
6. Enter the frequency number using the numeric
keypad. (Be sure to include the decimal point.)
1 2 5 . 2 5
.
If you make a mistake and want to clear the entry,
press .
twice and re-enter the frequency.
14
G:...sc150om.vp
Tue Dec 23 10:29:58 1997
Color profile: Disabled
Composite Default screen