Sandvik Coromant Quick Change for CNC Lathes - Manual (Page 35)

35
Master Gauge
• Cx-MAS-01
To qualify the datum position on all clamping units
and pre-measuring units
• Cx-MAS-11 For clamping unit alignment – important for drilling
Cx-MAS-01
Cx-MAS-11
Pre-measuring fixture
For pre-measuring close to the machine a fixture block with
dial indicator can be used. When the pre-measured unit is
returned to the clamping unit in the turret, the edge deviation
is compensated through the machine control offset.
The master gauge is used to define the same ‘zero’ position
for clamping units and measuring fixture.