Ag Spray Equipment RM55 - Manual (Page 2)

2
RM 55 HORIZONTAL
AG SPRAY EQUIPMENT OWNER’S MANUAL
______________________________________________________________________________
Congratulations on purchasing your new three point hitch field sprayer. This manual is designed to aid
you in operating your new sprayer. Also enclosed is a parts breakdown on your roller pump, pressure
regulator, 43L-AL spray gun, and calibration on the KLC-18, Boomjet, Hamilton, Boomextender
boomless nozzles & 4 row deluxe boom.
WARRANTY
All Field Sprayers are under warranty by Ag Spray Equipment for a one year period from the date of
purchase. This warranty only applies to defects in workmanship or manufacturers defects in their
components. This warranty does not cover any misuse, abuse or parts that may freeze & break. Owners
are responsible for these issues. Parts proven defective within the one year period will be replaced at no
charge.
Ag Spray Equipment must be notified immediately of any defects or parts broken due to shipping during
the warranty period. After the one year period, all warranty is void. No product will be accepted for
return without authorization. All returned goods must be packaged securely and shipped with
transportation charges prepaid.
For further information regarding parts or warranty, contact:
Ag Spray Equipment
1100 New Industry Lange
Hopkinsville, KY 42240
Phone: 1-800-637-7172
Operation & Instructions of New Sprayer
First, back your tractor up to the sprayer, let lift arms all the way down and insert the lift pins into the lift
arms of the tractor and secure with lock pins. Secondly, hook up the top link on the tractor to the very top
hole of the frame. Connect the pump to the PTO shaft on your tractor by pulling the orange coupler back
while sliding it onto the PTO shaft until the balls lock into the grooves on the shaft. After pump is secure
take the chain and wrap it around the drawbar of the tractor using the snap link to snap the chain together
to keep pump from twisting hoses when PTO is engaged.
Next, fill the tank at least _ to _ full of plain water with no chemicals. Screw the pressure regulator (part
#23120-3/4-pp) part of the way out (gray knob). This ensures that you do not over pressurize and break
the gauge. Also, make sure valve underneath tank is open (handle should be turned going with the line).
You are now ready to try out your sprayer. Engage the PTO lever and pull throttle to the 540RPM mark
on the RPM gauge. Turn boom valve on & adjust to the desired operating pressure with the pressure
regulator (gray knob, part #23120-3/4-pp).