90 day limited warranty, Specifications, Problem possible cause possible solution – Maxsa Innovations Battery-Powered Motion-Activated Outdoor Night-Light User Manual

Page 2

Advertising
background image

v13.2

2012

[email protected]

90 DAY LIMITED WARRANTY

This Motion-Activated Light is warranted against faulty material and/or workmanship for a period of 90 days from date of original

purchase. The obligation of the manufacturer, under this warranty, is limited to servicing and replacing defective parts when the unit is

returned to MAXSA Innovations, freight pre-paid during the warranty period. To obtain warranty repair, the purchase receipt should be

returned with the product.
This warranty becomes void on any unit which has been tampered with, damaged by accident, or damaged otherwise by improper

operation.
This guarantee is in addition to any guarantees implied by State or Federal Legislation.

Page 2

SPECIFICATIONS

Batteries Required: 3 AA cell alkaline

Wattage: Maximum 0.72 W, static ≤ 0.24 mW

Voltage: 4.5 V DC

Light Duration: Approximately 45 seconds (± 10 seconds) from last motion detected.

Motion Sensor Range: Up to 10 feet when mounted 1 foot or more off the ground.

Weatherproof Rating: IP44

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Light does not turn on when

there is movement in the

detection area.

1. Batteries are old.
2. Nearby lighting is too bright.
3. The sensor is facing the wrong direction.

1. Heat sources such as air conditioners, vents,

barbecues, other outside lighting, or moving cars

are triggering the motion sensor.

2. Pets or other animals are triggering the motion

sensor.

3. Reflections from swimming pools, jacuzzis, white

walls, or other large reflective surfaces are trigger-

ing the motion sensor.

1. Replace the batteries with fresh batteries.
2. Redirect the sensor or install in a different location,

away from other lighting.

3. The sensor is directly below the light and should be

facing in the direction of movement.

1. Install the Outdoor Night-Light™ away from the

sources of interference.

2. Redirect the sensor.
3. Install the Outdoor Night-Light™ away from the

sources of reflections.

Light turns on for no apparent

reason (false trigger).

Advertising