Alpine CDA-7846E - Manual (Page 10)

10
English
Basic Operation
Subwoofer On and Off
Change the setting when an optional product
having the Subwoofer output terminals is Ai-
NET connected.
Press and hold the PWR button for at least 3
seconds.
Press the F1 button repeatedly to select
"SUBW.". With each press, subwoofer is
toggled ON or OFF.
When the subwoofer is ON:
Press the MODE button for at least 2 seconds
repeatedly, and the subwoofer output phase is
toggled 0° or 180°.
Press the PWR button, after setting the
subwoofer ON.
Press the MODE button repeatedly to select the
subwoofer mode.
Press the or button to adjust the
subwoofer output level.
The setting is displayed for 5 seconds and then
memorized.
1
PWR
INTLZ
2
F1 SUBW ON
SUBW OFF
4
MODE
LOUD
PWR
INTLZ
VOLUME
BALANCE
FADER
Subwoofer
5
SW 15
3