Haws 2000SMS - Manual (Page 3)

3/14 Model 2000SMS Page 3 of 5
Step 2: Remove the 4 mounting screws on the outside
of the Hydration Station with a Phillips
screwdriver (see Step 2 Diagram) and remove
the mounting bracket from the Hydration
Station.
Step 3:
Remove the drain basin, drain grate, and filter cartridge from the small box inside the main shipping
carton. Install the drain basin with grate into the front of the unit (see Step 3 Diagram), pushing it straight
in until the snap latches are fully engaged.
Step 4: Thoroughly read Trademark Usage Guidelines (TUG) in Owner’s Manual on
page 2 prior to removal of TUG label on filter cartridge (see Step 4 Diagram A).
Removal of filter label constitutes approval of and compliance with TUG. Firmly
screw the filter cartridge into the filter head (see Step 4 Diagram B). NOTE: the Hydration
Station will work only if a filter cartridge is installed and its wiring is plugged in (see Step 7).
Step 2 Diagram
Step 4 Diagram B (Back View)
Step 4 Diagram A
Step 3 Diagram