Arcam AVR Surround Amplifer AV888 - Manual (Page 32)

E-30
�� Cd device Mode
The c Device Mode button configures the CR102
to control the CD functions of Arcam CD players,
although this can be changed (see page 25). Pressing this
button also selects CD as the AVR600/AV888 source.
P Toggles power between standby and on.
0 … 9 Functions as original remote number key.
PHONO
E
Selects TApE input on the AVR600/AV888.
ShiFT + E selects phono input on the
AVR600/AV888.
RPT
r
Toggles random (‘shuffle’) play on and off.
ShiFT + r cycles through the repeat
options (track, disc, etc.).
S
Modifies many keys (see individual key
descriptions, below)
AUX
H
Selects multichannel ( MCh ) input on
AVR600/AV888.
ShiFT + H selects AuX input on the
AVR600/AV888.
NET
e
Selects ipoD input on AVR600/AV888.
ShiFT + e selects network ( nET ) internal
input on the AVR600/AV888.
��
Navigates track listings if supported by the
player.
oK selects the currently highlighted track if
supported by the player
M
Changes the time display modes on Arcam
CD player
U (not used)
D
Cycles through the front panel display’s
brightness options.
ShiFT + D enables RpT A-B functionality if
supported by the player.
@
Toggles the mute function. By default this
key operates the AVR600/AV888 Mute.
]
Press and release to skip back to the
beginning of the current/previous track.
[
Press and release to skip forwards to the
beginning of the next track.
- +
Decrease ( – ) and increase ( + ) AVR600/
AV888 volume.
) Fast rewind
$ Play
& Toggles pause of playback
( Fast forward
! Open/close disc tray
# Stop playback
%
Start recording (on products that have this
feature)
h
Scans first 10 seconds of each track on CD,
if supported by the player (Audio search)
FAV+
u
Starts Program mode
FAV-
t
Clears programmed item
HOmE
o
(not used)
INFO
b
(not used)