Avaya LUMULZMIC User Manual
Page 2
©
1
999 Bogen Communications, Inc.
All Rights Reserved. Printed in U.S.A.
Notice
Every effort was made to ensure that the information in
this guide was complete and accurate at the time of print-
ing. However, information is subject to change.
Important Safety Information
Always follow these basic safety precautions when installing
and using the system:
1
. Read and understand all instructions.
2. Follow all warnings and instructions marked on the prod-
uct.
3. DO NOT block or cover the ventilation slots and open-
ings. They prevent the product from overheating. DO NOT
place the product in a separate enclosure or cabinet, unless
proper ventilation is provided.
4. Never spill liquid on the product or drop objects into the
ventilation slots and openings. Doing so may result in seri-
ous damage to the components.
5. Repair or service must be performed by a factory
authorized repair facility.
6. The product is provided with a UL-CSA approved, 3-wire
ground type plug. This is a safety feature. DO NOT defeat
the safety purpose of the grounding type plug. DO NOT
staple or otherwise attach the AC power supply cord to
building surfaces.
7. DO NOT use the product near water or in a wet or
damp place (such as a wet basement).
8. DO NOT use extension cords. The product must be
installed within 6 feet of a grounded outlet receptacle.
9. DO NOT install telephone wiring during a lightning
storm.
1
0. DO NOT install telephone jacks in a wet location
unless the jack is specifically designed for wet locations.
11
. Never touch uninsulated wires or terminals, unless the
line has been disconnected at the paging or controller
interface.
1
2. Use caution when installing or modifying paging or con-
trol lines.
Support Information
Paging systems integrated with small phone systems such as
Merlin Legend and Partner are supported by the National
Service Assistance Center (NSAC). The main number for
the NSAC is 800-628-2888. Paging systems integrated with
large switches such as the DEFINITY G3 are supported by
the Technical Service Center (TSC). The main number for
the TSC is 800-242-2121.
Page 2 of 7