Audiovox XMH-10 - Manual (Page 26)

- 26 -
Set Clock
This feature allows the user to personalize the clock display.
The clock data is provided via the XM
7 signal, and is displayed
according to the users settings. Use the Rotary/Select Knob or
the UP and DOWN buttons on the remote control and highlight one
of the three options on the Set Clock Screen (See figure 30).
Press the Rotary/Select Knob or the Remote’s (XM) Select button
to set your selection. Refer to the following paragraphs for addi-
tional instructions.
Time Zone
This feature is used set the clock to the Time Zone in which the
user resides (see Figure 31). Use the Rotary/Select Knob or the
remote control UP and DOWN buttons to highlight the desired time
zone. Press the Rotary/Select Knob or the Remote’s (XM) Select
button to enter your selection. Acceptance is confirmed by an
audio beep and confirmation screen.
Figure 30. Set Clock Screen Setting Time Zone Figure 31. Time Zone Set Screen