Auto-on, Auto-off / sleep timer – Audiovox XMH-10 User Manual

Page 28

Advertising
background image

-

28

-

Auto-On

The Xpress XM

7 unit is configured to shut down when the

vehicle is shut OFF or power is disconnected. By default, when
the power to the unit is reapplied the user must press the
Power button to turn the unit back ON. This feature allows the
user to program the Xpress XM

7 unit to automatically turn ON

when the power to the unit is reapplied (much like a car radio).
When in the Auto-On menu use the Rotary/Select Knob or the
Remote control UP and DOWN buttons to highlight either On or
Off (see Figure 34). When the desired setting is highlighted,
press the Rotary/Select Knob, or the remote’s (XM) select button
to enter your selection. Acceptance is confirmed by an audio
beep and confirmation screen.

Figure 34. Auto-On Screen

Auto-Off / Sleep Timer

This feature allows the user to program the Xpress XM

7 unit to

automatically shut OFF if the unit remains in an inactive state for
a period of time ranging between 15 Minutes and 3 hours (see
Figure 35). There are 6 available settings:

15 Minutes

30 Minutes

45 Minutes

1 Hour

2 Hours

3 Hours

This feature is useful in preventing the vehicle battery from
draining in cases where the unit is installed with a constant
power source. It is also useful as a Sleep Timer turning the unit
OFF automatically after a period of time.

When in the Auto-Off / Sleep Timer mode use the Rotary/Select
Knob or the Remote Control UP and DOWN buttons to highlight
one of the six (6) time settings you wish to select.

When the desired time setting is highlighted, press the Rotary/
Select Knob, or the remote’s (XM) select button to enter your
selection. Acceptance is confirmed by an audio beep and confir-
mation screen.

Advertising