HighPoint RocketStor 5122R - Manual (Page 12)

12
Logical Device Information – This section displays information about the devices and arrays you have
configured.
Name - The name assigned to each hard disk/SSD by the RocketStor hardware
Type - The RocketStor will classify the storage device as either Hard Disk or SSD (if not configured into an
array), or by the RAID type (RAID 0, 1 or JBOD).
Capacity - The total capacity of the storage device or RAID array
OS Name - The name OS X has assigned to the device.
Status - The current status of the storage device or array.
Unplug – You can use this function to safely remove a configured Array.
Note: this function is separate from the RocketStor’s Hot-Plug and Hot-Swap features. Unplug is
not needed for non-RAID configurations.
RocketStor SMART RAID – displays information about the hard drives or SSD’s you have installed into
the RocketStor device.
Location: The physical location of the Hard Disk or SSD (RocksetStor SMART RAID bay)
Model: The model name of the Hard Disk or SSD
Capacity: The total capacity of the Hard Drive or SSD
Status: The operating status of the Hard Disk or SSD (Normal/Disabled)
4.3 Event
Event – This section chronicles all events related to the RocketStor SMART AID. Events include the
creation and deletion of arrays, hot-plug/hot-swap actions (show below), and device or array warnings and
failures.