HighPoint RocketU 1022C - Manual (Page 5)

5
Installing the RocketU Series Host Adapter
Note: Make sure the system is powered-off before installing
the RocketU series host adapter.
1. Open the system chassis and Locate an unused PCI-Express ×1 (x4,
×8 and ×16) slot.
2. Remove the PCI-Express slot cover.
3. Gently insert the RU series into the PCI-Express slot, and secure the
bracket to the system chassis.
4. Insert a standard 4-pin Molex 8981 power connector (female) into
the power port of the RocketU 1022C. This connector type is
commonly used with SATA hard drives, and is included with nearly
all desktop PCs.
5. After installing the adapter, attach the hard disks or disk enclosure
to the RU series card using the USB cables.
6. Close and secure the system chassis.
Driver Installation (Microsoft Windows)
Install Driver From Software CD
1. Insert the HighPoint Software CD into the CD/DVD drive.
2. On the Start menu, select “Control Panel”.
3. Select the “Hardware and Sound” tab and select the 'Device
Manager' button.
4. For Windows OS: Expand the 'Universal Serial Bus Controllers' entry.
Right click on 'ASMedia xHCI Controller' item.
5. Select 'Update Driver Software' item.