HighPoint RocketU 1022C - Manual (Page 6)

6
6. Browse to the software CD folder:
\RocketU\RU1022x_114x\Windows
7. You can click the Setup.exe icon in the driver folder to install
RocketU 1022C driver automatically.
Note: ASMedia ASM1042x driver was embedded into Windows 8
OS.
Verify Installation of the Software
1. On the Start menu, select 'Control Panel'.
2. Open on the 'System' applet (You may first have to select 'Switch to
Classic View').
3. Select the 'Hardware' tab  'Device Manager' button.
4. For Windows OS: expand the 'Universal Serial Bus Controllers' entry.
Right-click on 'ASMedia xHCI Controller'.
5. Select 'Properties'  'Driver' tab  'Driver Details' button. The
following file should be displayed, then installation was successful:
-'system32\DRIVERS\asmtxhci.sys'
Connecting USB Storage Devices
1. Make sure the RocketU 1022C has been installed into your PC.
2. Connect the USB device to the HighPoint RocketU HBA with USB
3.0 cables.
3. Allow the drives/enclosure to spin up for a few moments. Once the
devices are ready, they will be recognized by the operating system
and can be accessed as needed.