Power Jacks EMA Actuators - Manual (Page 3)

EMA Linear Actuator
Tel: +44 (0) 1358 285100 email: [email protected]
web: www.powerjacks.com
3
1. Safety Authorised use
EMA electric linear actuators are exclusively designed for carrying out lifting, lowering
and feeding movements with the lifting forces up to 10 kN. Any other application other
than specified or one going beyond the above mentioned capacity is unauthorised. The
manufacturer is not liable for damages resulting from such applications. The user alone
has to bear the risk.
Since the actuators can be applied in various areas, the user is responsible for the
specific application of use.
In compliance with the regulations concerning the electromagnetic compatibility of
machines, the EMA linear actuators may only be used in industrial areas according to
the definition EN 50 081-2.
Safety instructions in the operating manual
This symbol indicates potential dangers to people. Comply with
the instructions in order to avoid injury.
This symbol indicates potential dangers to the unit. Comply with
the instructions in order to avoid damage to the unit.
This symbol indicates special information on:

the best possible use of the unit

how to facilitate operation of the unit
1.1 Residual risk and hazards
Should a risk of damage to material or injury to persons remain despite the structural
safety of the EMA actuators, the user must employ other safety measures and draw
attention to such hazards by means of suitable warning notices and written instructions
indicating safety precautions.
1.2 Operating personnel
The EMA electric linear actuators are designed according to state-of-the-art technology
and are in line with applicable safety regulations.