Power Jacks C-Series - Manual (Page 7)

www.powerjacks.com 7
1.6 Operating Personnel
1.6.1 The C-Series screw jacks are designed according to state-of-the-art technology and are in line
with applicable safety regulations. However, the general risks of personal injury or damage to
property connected with the use of such machinery cannot be completely eliminated. Therefore
the units may only be assembled and operated by competent and qualified personnel and only
be used for the authorised application.
1.6.2 Therefore a careful study of this operating manual should be made before attempting to use or
service the unit and particular attention should be paid to the safety instructions.
1.6.3 Work to be performed on electrical parts, such as:
• Installation of limit switches
• Mounting of the drive
• Check of the direction of rotation
should only be carried out by qualified electricians.
1.6.4 The C-Series screw jacks and the installation should be inspected by the operating and
supervising personnel for externally visible damage and defects at least once every shift. Any
changes (including the operational conditions) which may affect the safety are to be reported
immediately.
Introduction
1