ARI Armaturen ARI-PACO 1,6kN EN User Manual
Page 16
Advertising
Page 16
0040506001 1811
Operating and installation instructions
Electric thrust actuator ARI-PACO 1,6 kN
Fig. 9
- Mount limit switch and secure with
securing rings
- upper limit switch attached to
connector 61, 62, and 64,
- lower limit switch attached to
connector 41, 42, and 44.
- Clamping strip and terminal strip shield
are screwed on with self-tapping screws.
- After mounting, secure the cable
connector from the clamping strip to the
end switches with cable ties.
Do not run cables near moving parts or
endangered locations.
- The electrical connection is carried out as
in the Fig. 9
Fig. 10
blue
black
grey
red
white
brown
blue
grey
black
red
brown
white
Advertising