Acura 08P34-SEC-2001-81 - Manual (Page 2)

2
REMOVAL
To remove the cover, first release both ends from under the bumpers. Fold the cover
from one side of the car toward the middle. Remove the mirror pockets from the side
mirrors carefully; do not pull or tug on them as this may tear the cover, or break the
mirrors. Make the fold about two feet wide (see figure B). Make the same fold from
the other side of the car to meet the first folded section. Then fold the cover from the
front to the back of the car in two foot folds (see figure C). Place the folded cover in
the storage bag and store it in the trunk/luggage compartment. Using this procedure
will make the installation and removal of the cover prompt and efficient.
FIGURE B
FIGURE C