Catrac, Development sheet – AMETEK Snaptrac User Manual
Page 31
31
6380 Brockway Road • Peck, MI 48017 • 800.325.8074 • 810.378.5511 • Fax 810.378.5516 • www.AMETEKAPT.com
CATRAC
®
Development Sheet
31
6380 Brockway Road • Peck, MI 48466 • 800.325.8074 • 810.378.5511 • Fax 810.378.5516 • www.ametekapt.com
CATRAC
®
Development Sheet
Machine / Environment Specifications
Machine Type or Name
Machine Total Travel Distance
Direction / Orientation of Travel ❑
Horizontal ❑ Vertical ❑ Side Running ❑ Other If other, please provide sketch.
Fixed End Mounting Location
❑
Center (Of total machine travel) ❑ Off Center (Distance from center_________________)
Mounting Bracket Position
❑
Inward ❑ Outward ❑ Both ❑ Other
Operating Speed (ft/sec)
❑
≤ 5 ft/sec ❑ ≤ 10 ft/sec ❑ ≤ 15 ft/sec ❑ ≥ 15 ft/sec
Acceleration (ft/sec)
❑
≤ 5 ft/sec² ❑ ≤ 10 ft/sec² ❑ ≤ 15 ft/sec² ❑ ≥ 15 ft/sec²
Environmental Data
❑
Indoor ❑ Outdoor ❑ Wet* ❑ Dry ❑ Corrosive ❑ Abrasive ❑ Humidity* ❑ Chemical* ❑ Chips* ❑ Hot Metal ❑ Fluid Exposure*
*Please explain type or level________________________________________________________________________________
Operating Temperature
❑
≤ 40F (5C) ❑ ≤ 150F (66C) ❑ ≤ 250F (121C)
Dimensional Limitations
OAW = ___________ OAL = ___________ OAH = ___________ (Allow an additional 2 in. for operating clearance in OAH)
Carrier Contents
Critical information. Please include MFG cut sheets when possible.
Note: If a bend radius is not provided, the customer agrees to using 8 to 10 times the cable or hose diameter as a factor.
Cable / Hose
Quantity
Outside
Diameter
Weight Per Foot
(Fluid fi lled on hoses)
Min. Bend Radius
(MFG Specifi cations)
Customer Information
Contact Name
Fax
Company
Phone
Date
Please fi ll in completely and accurately and fax to the CATRAC Sales Department @ (810) 378-5516.