AMETEK Snaptrac - Manual (Page 4)

4 6380 Brockway Road • Peck, MI 48017 • 800.325.8074 • 810.378.5511 • Fax 810.378.5516 • www.AMETEKAPT.com
CATRAC
Carrier Designs
4 6380 Brockway Road • Peck, MI 48466 • 800.325.8074 • 810.378.5511 • Fax 810.378.5516 • www.ametekapt.com
CATRAC
®
Carrier Designs
RC Rod Carriers
Available on 2CP, 3CP, 203, 375, 304 style tracks, this
tubing is used to hold the entire CATRAC
® together. They
are fastened to links with a self tapping screw that can be
removed from top or bottom rod to make installation of
hose or cable easier.
WC Welded Carriers
The carrier is widely used in very rugged applications. It
can withstand severe hydraulic shock and has no loose
parts which can be lost during installation of the hose
cable. The welded carrier bars alternate position top to
bottom on styles 203, 375 and 304. Styles 456, 606 and
808 use a box beam construction with top and bottom
beams across from each other for added strength.
RP Removable Pipe (Standard)
This assembly provides easy installation of cable and
hose. The pipe can be removed by knocking out a roll pin
and pulling it out the side of the CATRAC.
SL Spring Loaded Removable Pipe
This design provides the quickest way to install or
change cable and hose in the fi eld. Simply compress the
plunger and pull the pipe out. No screws or pins need
to be removed and no side space limitations need to be
considered.