High Country Tek MVP-SVR Series - Manual (Page 11)

021-MVP-SVR Rev A MVP-SVR User Manual 11
Copyright © High Country Tek, Inc. – 2013
MVP-SVR
Power Saver Valve Controller
Wiring
Order Information
The following is a break-down of the MVP part numbering system:
M V P - S V R - 0 6 A - 1 0 F
10F = 10ft cable
20F & 30F standards
06A = 600mA output
25A = 2500mA output
Required Communication Cables:
For the Hand Held Interface Device: P/N: CBL-IRA
For the PC software SAM: PN: CBL-IRMU
P/N: CBL-IRMU P/N: CBL-IRA