Power Bright APS300 - Manual (Page 2)

Read these instructions before connecting and using your
PowerBright™ Pure Sine Power Inverters. Failure in observing
this warning may result in injury to persons and damage to
equipment.
General safety and installation information.
Warning! The following fundamental safety measures must be
observed when using electrical equipment to avoid danger of:
- Electric shock
- Fire
- Injury
About the unit itself
- The inverter must only be used for the purpose specified by
the manufacturer.
- Do not operate the inverter if the housing of cables are
damaged.
- The inverter must be positioned and secured safely in order to
avoid knocking over or dropping
- If casing needs to be opened, make sure Input cables have
been properly disconnected.
- The inverter must be kept in a safe place out of the reach of
children.
- The inverter may not be operated in a damp or wet
environment.
- The inverter may not be used in rooms containing flammable
materials.
- Make sure the inverter is well ventilated.
- Service and repair may only be carried out by skilled persons
who are familiar with the risks involved and the relevant
regulations.
Caution by installation on boats!
- Incorrect installation of electrical units on a boat may lead to
corrosion of the boat. Therefore, please let a (boat) electrician
carry out the installation of the inverter.