Bloom Manufacturing 2200 Series - Manual (Page 3)

WARNING
Failure to Heed The Following Warnings
May Result In Serious Injury Or Death
• Bloom Speed Reducers are not to be used to lift, hoist, or move people. If your task involves lifting or moving people,
you must use the proper equipment, not this speed Reducer.
• Bloom products are sold on the strict understanding that all products selection is the full responsibility of the purchaser.
• Bloom accepts no liability for the use, misuse or incorrect application of its products.
• Make sure that all equipment is maintained properly.
•
Ensure the correct equipment is obtained and installed for the application
• Ratings shown in Bloom literature are applicable only to new products.
•
In general, products displayed in Bloom literature are used as parts of a system. As a result, we can only recommend
within the working load limits, or other stated limitations, the use of products for this purpose.
• No equipment should be installed, operated, or maintained by any person who has not carefully read all contents of this
manual. Serious physical injury or property damage can result from failure to read and apply the instructions contained
therein. Therefore, we urge you to read all operating instructions and warnings carefully. If any instruction or warning is
not clear, or if you feel you need additional information, please contact Bloom Mfg Inc. This manual should not be
understood to prepare you for every possible situation. It is the owner’s and user’s responsibility to determine the
suitability of a product for a particular use. Applicable industry, trade association, federal, state, and local regulations
should be reviewed.
• Working load limits or safety factors for each Bloom product may be affected by wear, misuse or environmental
conditions. Regular Inspection must be conducted to ensure the equipment continues to meet the published standards.
If you have questions not answered in this manual or require additional copies or the manual is damaged, please contact Bloom Mfg., Inc.,
1443 220th Street, Independence, Iowa 50644.
This sample manual is based upon general industry considerations and does not take into account product or manufacturer specific exposures or This sample manual is based upon general industry considerations and does not take into account product or manufacturer specific exposures or
needs. This sample manual may not be adopted by a product manufacturer as its manual, but may be used by the manufacturer in the process of
developing its own manual, based upon its specific products and operations, after consulting with its advisor.
Section 2 Warranty
LIMITED NINETY (90) DAY WARRANTY FOR HYDRAULIC SPEED REDUCERS Effective date January 1, 1999
Bloom Mfg. Inc., Independence, Iowa 50644, provides the following limited ninety (90) day warranty on its product to the
purchaser of this product and to any person to whom such product is transferred during the duration of this warranty. The
warrantor's obligation shall be limited to repairing or replacing at the factory in Independence, Iowa, USA, any part or parts
which shall within the ninety (90) day period hereinafter specified be returned to it with transportation prepaid and which upon
3 Bloom Mfg Inc. 319-827-1139 319-827-1140 fax www.bloommfg.com
y ( ) y p p p p p p
examination by Bloom Mfg. Inc. shows to have been defective. This warranty shall not apply if:
(a) the product has been altered, repaired or modified outside the warrantor's factory in any way that would adversely affect
its operation.
Page 3 of 6