Summers 4-Rank Superweeder - Manual (Page 12)

SECTION 1 - SAFETY
1-8
GENERAL ASSEMBLY SAFETY PRACTICES
YOU ARE RESPONSIBLE for the safe
assembly of the machine.
DO NOT ALLOW CHILDREN or other
unauthorized persons within the assembly
area.
WEAR PERSONAL PROTECTIVE
EQUIPMENT which includes a hard hat,
eye protection, work gloves and steel toed
boots with slip resistant soles.
DO NOT MODIFY the equipment or
substitute parts in any way. Unauthorized
modification may impair the function and/
or safety of the machine.
USE SUITABLE LIFTING DEVICE for
components which could cause personal
injury.
BLOCK UP ANY RAISED PART of the
machine. Be sure machine is stable after
blocking.
ALWAYS INSPECT LIFTING CHAINS
AND SLINGS for damage or wear.
BE SURE LIFTING DEVICE IS RATED
TO HANDLE THE WEIGHT.
STOP ENGINE, place all controls in
neutral, set parking brake, remove ignition
key and wait for all moving parts to stop
before serving or adjusting.
BE SURE PRESSURE IS RELIEVED
from hydraulic circuits before servicing or
disconnecting from tractor.
USE EXTREME CARE when assembling,
servicing or adjusting.
GENERAL ASSEMBLY INSTRUCTIONS
1. READ AND UNDERSTAND Operator’s Manual before assembly of machine.
2. Reference to “RIGHT” and “LEFT” is determined when machine IS VIEWED FROM THE REAR.
3. Reference to “FORWARD” means TOWARDS THE TRACTOR.
4. Reference to “REAR” means AWAY FROM THE TRACTOR.