Summers 4-Rank Superweeder User Manual
Page 56
INSTALLATION INSTRUCTIONS
8C2270 - CABLE GUIDE BRACKET
72’ & 88’ SUPERHARROW 2650
Parts required for installation:
Qty
PN
Description
2
8C2270
Cable Guide Bracket
2*
8X0113
Bolt 3/4” x 5” (Use without Hyd. Tine Angle Pivot Bracket)
4*
8X0123
Bolt 3/4” x 5-1/2” (Use with Hyd. Tine Angle Pivot Bracket)
4
8X0317
3/4” Flat Washer
Refer to the photos below to install the cable guides. The guides must be mounted on the top out-
side of the first mounting bracket on each wing. The guide prevents the inside pull cable from get-
ting caught beneath the drawbar. Replace existing 3/4” bolts in mounting brackets with longer bolts
to allow installation of 8C2270. Secure with existing 3/4” locknuts and flat washers.
CAUTION: Spring flat tension and weight of attached brackets must be supported when
replacing 3/4” bolts.
8C2270
8C2270
SECTION 3 - SUPERHARROW 2650
3-12