Summers Truck Supersprayer - Manual (Page 31)

SECTION 3 - SPRAYER OPERATION
3.7
3. ADD CHEMICAL TO MAIN TANK
USING CHEMICALS? PROTECT YOURSELF!
HIGH HAZARD REQUIRES:
*goggles
*respirator
*avoid fumes
*rubber gloves and skin protection
1. REFER TO SIGNAL WORD AND REQUIRED
PERSONAL PROTECTIVE EQUIPMENT
WHEN USING CHEMICALS.
2. ALWAYS READ AND FOLLOW CHEMICAL
MANUFACTURERS’ WARNINGS, INSTRUC-
TIONS AND PROCEDURES BEFORE USING.
MODERATE HAZARD REQUIRES:
*goggles
*avoid fumes
*rubber gloves and skin protection
3. HANDLE CHEMICALS WITH EXTREME
CARE.
4. IN CASE OF POISONING, GET IMMEDI-
ATE MEDICAL ATTENTION. A CONTAINER
LABEL MAY BE BENEFICIAL FOR QUICK
TREATMENT.
LOW HAZARD REQUIRES:
*avoid fumes
*rubber gloves and skin protection
5. BE SAFE!
A. ADD CHEMICAL TO MAIN TANK by using one of the following methods:
1. Add chemical through top fill well.
2. Add chemical through optional mix and fill kit.
4. ADJUST MANUAL VALVE FOR AGITATOR CONTROL
IMPORTANT!
1. BECAUSE OF THE WIDE RANGE OF SPRAYING CONDITIONS, THE OPERATOR IS RE-
SPONSIBLE FOR ACCOMPLISHING BOTH PROPER AGITATION AND DESIRED APPLICA-
TION RATE.
2. UNDER MOST SPRAYING CONDITIONS, THE MANUAL VALVE SHOULD BE FULLY
OPEN.
3. BE SURE JET AGITATORS ARE NOT PLUGGED.
4. MIX CHEMICAL THOROUGHLY BEFORE SPRAYING.