Triton BathyPro - Manual (Page 20)

Figure 2. Typical preliminary Attitude Editor dialog box
Setting Parameters in the Attitude Editor Dialog Box
After the Attitude Editor program is running, you can set up your parameters for
processing.
To set your parameters in the Attitude Editor dialog box
1. Click Add file(s) to list… and select one or more files having the file
extension XTF. The XTF file(s) must be composed of multibeam data. All
files in the list will be processed. Choose Delete file from list if a specific
line is not desired.
2. Put a check mark in Write output in a different directory and click the
down arrow to browse for the directory you want.
The system adds the specified XTF file name to the initially blank area.
Do not have your working directory be the same as the directory
holding your original XTF file(s). In the course of processing, any
file modifications will be written back to an XTF file of the same
name that you specified from the Add file(s) to list… button. If
the target XTF file is your original XTF file, it will be overwritten.
Make sure, therefore, that the directories for the named XTF
file(s) differ.
June 2004 BathyPro User’s Manual
20